 |
| |
MIDI SOLUTIONS Thru 2 Output Thru Box
|
$159.00
|
|
 |
All MIDI messages appearing at the input are sent to both outputs Active circuitry cleans up any skewing of MIDI data, minimising loss of quality at any point in the signal chain Requires no batteries or power supply |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Quadra Thru 4 Output Active Midi Thru
|
$169.00
|
|
 |
1-in 4-out MIDI Thru Box MIDI messages appearing at the input are sent to all four Thru outputs Active circuitry cleans up any skewing of MIDI data Requires no batteries or power supply to operate |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Merger 2 Input Midi Merge
|
$199.00
|
|
 |
All MIDI messages appearing at the two inputs are merged to the output A fast merging algorithm ensures that the MIDI data is processed with minimal delay.
|
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Midi Velocity Convertor
|
$279.00
|
|
 |
Midi Velocity Convertor applies selected velocity curves to incoming MIDI notes Can be selected from 40 preset curves or a user defined curve Can be reprogrammed with new settings as often as needed |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS 2 Output Midi Router
|
$279.00
|
|
 |
A 1-in 2-out MIDI data router/filter Messages can also be rechannelized to any other MIDI channel The Router will accept a total of 10 settings Settings are retained even when switched off & can be reprogrammed as often as needed |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Midi Controller Relay
|
$279.00
|
|
 |
| The Relay can be programmed to open or close in response to MIDI events. Settings are retained even after power is removed. The RELAY can be reprogrammed with new settings as often as needed. |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Pedal Controller
|
$289.00
|
|
 |
Accepts an expression pedal as an input and generates continuous MIDI data based on its position May be inserted inline at any point in the MIDI data stream Accurately tracks the position of the pedal |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Footswitch Multi Midi Event Generator
|
$289.00
|
|
 |
| The Midi Solutions Footswitch Multi Midi Event Generator creates MIDI events from a connected footswitch and merges them with any incoming Midi messages. |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Quadra Merge 4 Output Merge Box
|
$299.00
|
|
 |
4-in 1-out MIDI Merge Box All MIDI messages appearing at the four inputs are merged to the 1 output A fast merging algorithm ensures that the MIDI data is processed with minimal delay |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS Realtime Midi Mapper
|
$299.00
|
|
 |
| MIDI Solutions Realtime Midi Mapper. Convert MIDI messages from one type to another in real time. e.g: map MIDI Channel Pressure to MIDI Volume Message. |
 |
|
|
|
|
 |
 |
| |
MIDI Solutions Breathalyzer Breath Control Adaptor
|
$419.00
|
|
 |
Breath to MIDI converter for use with the Yamaha BC3A Breath Controller Can be reprogrammed with new settings as often as needed Generates continuous MIDI data corresponding to the amount of breath pressure applied |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS T8 8 Way Thru Box
|
$439.00
|
|
 |
1-in 8-out MIDI Thru Box Active circuitry cleans up any skewing of MIDI data Requires no batteries or power supply to operate MIDI Solutions Thru boxes can also be used to extend a MIDI connection further than the standard 50 feet |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS M8 8 Way Merge Box
|
$639.00
|
|
 |
All MIDI messages appearing at any of the eight inputs are merged to the 1 output A fast merging algorithm ensures that MIDI data is processed with minimal delay Requires no batteries or power supply to operate
|
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS F8 8 Way Relay Box
|
$695.00
|
|
 |
8x 1/4" phone jack inputs for connection to footswitches or contact closures Triggered event types are programmable Settings are retained when turned off and can be reprogrammed with new settings as often as needed. |
 |
|
|
|
|
 |
 |
| |
MIDI SOLUTIONS R8 8 Output Relay Device
|
$959.00
|
|
 |
| The R8 contains 8 relays which can be programmed to open or close in response to MIDI events. Programmed settings are retained even after power is turned off. The unit can be reprogrammed with new settings when needed. |
 |
|
|
|
|
 |
| |