|
|
|
Proel Flash 12A 250Watt Powered PA |
| |
| |
| The Proel Flash 12A is an extremely versatile 250Watt Powered PA cabinet. Perfect for portable DJs, fixed installation in clubs, bars and clubs,as well as conferences alike. |
| |
| Product Name: |
Proel Flash 12A 250Watt Powered PA |
| Product Code: |
FLAHS12A |
| Brand: |
Proel |
| |
|
 |
| |
| RRP |
AUD $899.00 |
| You Save |
AUD $130.00 |
| Our Price |
AUD $769.00 |
|
| |
|
|
| |
Proel Flash 12A 250Watt
Powered PA
|
| |
Italian engineered, the Proel FLASH12 is the most versatile model in the Flash Series of powered PA systems. It is the perefect solution for anyone looking for a well priced, reliable PA solution
which sounds head and shoulders over the majority of similarly spec'd powered PA units in the market. Proel have used their years of PA design expreience to come up with an elegant design with fantastic audio
which
will impress any audience.
The Flash 12A can be used for a wide variety of applications that require speakers to accurately reproduce the whole audio range while delivering quality sound and high efficiency.
Thanks to its compact size, exceptional portability and a variety of installation options, the FLASH12 is the perfect choice for musicians and small bands, for live monitoring,
for portable DJ reinforcement systems, for fixed installation in clubs, bars and disco-bars, and for voice reinforcement systems in conference rooms of any size.
Please note the price above is for 1 speaker only. The picture above is purely to illustrate the front and back of the 12A.
Proel Flash Series.
Proel introduces the FLASH Series, a new line of lightweight and easily manageable speakers, resulting from the experience and the technological know-how acquired in years of manufacturing
speakers using synthetic materials. In this series Proel's team of design engineers has managed to combine features of Italian style, recognized and appreciated all over the world,
with state-of-the-art mechanical, acoustic and electronic solutions. The Flash Series is designed for use in numerous applications as it guarantees maximum reliability and excellent sound quality.
FLASH12 is a full-range speaker with polypropylene enclosure, available in both passive (12P) and active (12A) versions. One of the outstanding characteristics of this line is the new high-frequency
horn, with wide constant-directivity coverage angle, designed to provide uniform response and low distortion. The loudspeakers used feature a 1 titanium-diaphragm compression driver and a 12
woofer with 2 coil.
The sturdy and lightweight polypropylene enclosure allows use as floor monitor, while the 4 M10 flying points, together with the optional accessories, make installation easy and flexible.
Transportation and installation are also eased by two aluminium handles on the sides and a recessed handle on the upper part of the enclosure. The module used in the active version includes
two amplification sections: 50 W for high output and 200 W class H for low output.
The speakers feature both a line input and a microphone input with independent level controls for both inpputs and 2-band equalization (Low + High) for enhanced sound
modulation.
They are protected against overload and distortion by a double clip limiter circuit.
FLASH 15S is a subwoofer with plywood enclosure, designed to complete the system when it is necessary to strengthen bass response. This subwoofer features a BPS configuration (bandpass with
double reflex), in order to provide dynamic low-frequency response and deliver superior performance. The passive version (15SP) integrates a crossover filter with filtered satellite output.
The active version (15SA) is equipped with a new 350 W class H amplification module and active stereo crossover with frequency control and phase inversion switch. In both versions, two heavy-duty
metal handles and four sturdy casters ensure easy loading and transport.
After the first public appearance at the Los Angeles NAMM, the new Flash Series will be exhibited at Show-way in Bergamo (24 to 26 February), at Pro Sound and Light in Frankfurt (12 to 15 March)
and at SIB in Rimini (5 to 8 April).
Check out the Proel Flash 15SA Sub-woofer by clicking on the following link: Proel 15SA.
Flash 15SA Rear Panel:
1. LINE IN (combo XLR-JACK input)
This is a female combo connector, which accepts a XLR or a JACK plug
from almost any type of equipment with a balanced or unbalanced line
level outputs.
NOTE: Whenever possible, use always balanced cables. Unbalanced
lines may also be used but may result in noise over long cable runs.
In any case, avoid using a balanced cable for one channel and an
unbalanced one for the other.
2. MIC IN (XLR input balanced)
This is a female XLR connector, which accepts a balanced microphone
input from almost any type of microphone. The XLR input is wired as
follows:
3. MIX OUT (XLR output unbalanced)
These XLR connectors provide an unbalanced line-level signal that
represent the mixed mic and line signal. Connect these to the inputs of
other powered speakers to make an array.
4. GND LIFT switch
This switch lift the ground of the balanced audio inputs from the earthground
of the amplifi er. If you have HUM noise problem on one or more
loudspeaker try to change the position of these switches (often all up or
all down for all the amplifi ers in the system). Please note that to have an
eff ect all cables must be balanced.
5. LINE LEVEL control
Rotary level control: it attenuates the level of the signal sent to the
LINE IN input, the attenuation ranges from 0 fully closed (the signal is
completely attenuated) to 10 fully open, nominal level (the signal is not
attenuated in any way, so is fed to the internal amplifi er at the same level
at which it arrives on input).
6. MIC GAIN control
The gain control adjusts the sensitivity of the mic input. There is the
minimum gain with the knob all way down, ramping up to maximum
gain when rotated fully clockwise. This allows the signal from mic to be
adjusted to optimal levels for the fi rst speaker and consequently for all
other speakers linked to the MIX OUT.
NOTE: LINE IN control must be full up for all other speakers.
7. LOW control
This control gives you up to 6 dB boost or cut at 90 Hz with a "SHELVING"
curve shape. Use it to add or reduce the sound "punch", or to reduce the
low frequency rise when the
speaker is set near walls or
on fl oor as stage monitor.
8. HIGH control
This control gives you up to
6 dB boost or cut at 8 KHz
with a "SHELVING" curve
shape. Use it to add or
reduce the sound "clarity"
and "brightness".
9. SIGN/LIMIT
indicator
GREEN LED illuminates to
indicate the presence of
the signal at the amplifi er
input.
RED LED illuminates when
the internal amplifier's
output is limited. When this
LED fl ashes reduce the input
signal level.
10. ON indicator
GREEN LED: when lighted indicates amplifi er has been turned on and AC
power is available.
11. POWER switch
Speaker is "ON" when the switch is in the "I" position, use this switch to
set the speaker power to ON or OFF.
NOTE: When you shut down your equipment, turn off the speaker
fi rst.When powering up, turn on the speaker last.
12. FUSE holder
Here is placed the mains protection fuse.
Please follow the instructions on page 4 of this manual to replace it.
13. AC~ socket Here's where you plug in your speaker's
mains supply cord. You should always use the mains cord supplied with the
speaker. Be sure your speaker is turned off before you plug the mains supply
cord into an electrical outlet. |
| |
Proel Flash 12A 250Watt
Powered PA
|
| |
| |
|
|
|
Specifications: |
| |
|
|
|
|
|
|
|
System type : 2-way processed active enclosure
Amplifier Continuous Power : 200 W+50 W bi-amp
Input Impedance : LINE: 20 kohm balanced, 10 kohm unbalanced
MIC: 2 kohm balanced, 1 kohm unbalanced
Frequency response : 50 Hz - 20 kHz
Sensitivity : 98 dB @ 1 W/1 m
Input Sensitivity : LINE: 0 dBu / 0.775 V
MIC: max -35 dBu
Low Frequency Device : 12'' woofer
High Frequency Device : 1'' compression driver Titanium diaphragm
Crossover Frequency : 2000 Hz
Low frequency equalizer : 100 Hz +6 dB, -6 dB shelving
High Frequency Equalizer : 8 kHz +6 dB, -6 dB shelving
Angolar coverage : 90° H x 60° V
Monitor Taper : 42°
Power Supply : 230 VAC 50Hz or 117 VAC 60 Hz
Maximum Power Consumption : 390 VA
Cooling : Natural convection (safety protection 65°)
Connectors : IN: combo, XLR F
LINK: XLR M
Construction : injection reinforced hi-density polypropylene
Mounting Pole : 1 x bottom
Flying System : 4 x M10 - top, bottom
Weight : 20 kg(44.100lb )
Dimensions (W x H x D) : 39 x 63 x 36 cm
Controls : mic level, line level, low eq., hi eq., gnd lift
Flash 12A + Flash 15 SA Sub:
|
| |
|
|
|
|
|
| |
|
|
|
|
