|
|
|
| |
| The Proel DB2A is a dual channel Active DI Box. There's not many dual DI Boxes on the market so the DB-2A is quite a popular unit. Perfect for running stereo signals long distances, noise free. |
| |
| Product Name: |
Proel DB2A |
| Product Code: |
DB2A |
| Brand: |
Proel |
| |
|
 |
| |
|
|
| |
|
|
| |
Proel DB2A Dual Channel
DI Box
|
| |
DB2A is an active 2-channel DI BOX that represents the most convenient solution for a long-distance, hum-free transmission of stereo signals.
For obtaining the best electronic performance, DB2A uses SMD components, low-noise IC for balancing the signals and differential inputs to eliminate typical ground-loop problems. The complete set of connections and the PAD up to 30 dB allows any kind of source to be fed in. DB2A is particularly suited for the use with stereo keyboards, DJ equipment and PC-based audio systems.
|
| |
Proel DB2A Dual Channel
DI Box
|
| |
| |
|
|
|
Specifications: |
| |
|
|
|
|
|
|
|
Type : 2 channel active DI
Width : 215 mm(8.465inch )
Height : 50 mm(1.969inch )
Depth : 125 mm(4.921inch )
Weight : 1 kg(2.205lb )
Rack Units : 1/2 rack unit
Removing the two molded sides and attaching two units, with the supplied brackets, you can mount two by two DI boxes into a standard 19¿ rack.
Power Supply : Phantom Power: +24 volts DC to +48 volts DC
External AC/DC adaptor: +9 volts DC with link
Standalone/Standby: 9 volt PP3 type battery.
Current drain : < 8 mA
Inputs : Two Parallel 1/4" jack connectors and one parallel RCA connector (unbalanced).
Input Impedance : 200 kOhm (pad at 0 dB)
47 kOhm (pad at -20 dB)
44 kOhm (pad at -40 dB)
Input Levels : +5 dBu (pad at 0 dB)
+25 dBu (pad at -20 dB)
+35 dBu (pad at -30 dB)
Outputs : XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground
Output Impedance : 50 ohm
Output Levels : into 600 Ohms or greater
+5 dBu (for 0.1% THD at 50 Hz)
+5 dBu (for 0.1% THD at 1k Hz)
Band width : from 10 Hz to 70 kHz, +0dB/-1 dB
Channels : 2 nr.
Distortion (THD) : < 0.007 %
S/N Ratio : < -105 dBu unweighted
Controls : On/off, Pad -20, Pad -30, Gnd Lift.
Notes : Phase distortion +4° at 20 Hz, -13° at 20k Hz
|
| |
|
|
|
|
|
| |
|
|
|
|
